Product ID:FASTBOND 34 INSULATION ADHESIVE TRANSLUCENT
MSDS Date:09/03/1988
FSC:8040
NIIN:00-181-7756
MSDS Number: BHVRK

3M

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 0F0U5

PACEBROOK LTD

CIRENCESTER GLOS GL7 2AG, MN 55128-3421 UK

Telephone: NONE

Cage: 0F0U5

NAPHTHA, MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 60-70%

HYDROCARBON RESIN

CAS: 68240-01-7

Fraction By Weight: 10-20%

BUTADIENE-DIVINYLBENZENE-STYRENE POLYMER

CAS: 9052-84-0

Fraction By Weight: 1-10%

TALL OIL ROSIN

CAS: 8052-10-6

Fraction By Weight: 1-10%

BENTONITE (INORGANIC CLAY)

CAS: 1302-78-9

RTECS: CT9450000

Fraction By Weight: 1-10%

OSHA PEL 5 MG/M3 (DUST)

ACGIH TLV: 5 MG/M3 (DUST)

STYRENE POLYMER WITH 1,3-BUTADIENE

CAS: 9003-55-8

RTECS: WL6478000

Fraction By Weight: 1-10%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: VAPOR & LIQUID MAY CAUSE EYE
IRRITATION. LIQUID MAY CAUSE SKIN IRRITATION. VAPOR OVEREXPOSURE
MAY CAUSE RESPIRATIORY SYSTEM IRRITATION.INGESTION MAY CAUSE
DIGESTIVE SYSTEM IRRITATION. CHRONIC: REPEATED & PROLONGED SKIN
CONTACT MAY CAUSE DERMATITIS. REPEATED & PROLONGED INHALATION MAY
CAUSE NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:THE COMPONENTS OF THIS PRODUCT HAVE NOT
SHOWN ANY EVIDENCE OF BEING CARCINOGENIC.
Effects of Overexposure:EYE CONTACT MAY CAUSE SMARTING, TEARING,
REDNESS, AND SWELLING. SKIN CONTACT MAY CAUSE DRYNESS AND CRACKING.
INHALATION MAY CAUSE DIZZINESS, WEAKNESS, FATIGUE, NAUSEA,
HEADACHE, FACIAL NUMBNESS, VISUA L DISORDERS, INCOORDINATION,
DECREASED REACTION TIME AND ANEMIA. INGESTION MAY CAUSE NAUSEA,
VOMITING AND DIARRHEA.
Medical Cond Aggravated by Exposure:PERSONS WITH A SKIN DISORDER OR
RESPIRATORY AILMENT SHOULD USE CAUTION WHEN HANDLING OR USING THIS
PRODUCT.

First Aid:SKIN: WASH AFFECTED AREA WITH SOAP AND WATER. INHALATION:
REMOVE PERSON TO UNCONTAMINATED AIR. CALL A PHYSICIAN. EYE:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 10
MINUTES. CALL A PHYS ICIAN. INGESTION: GET IMMEDIATE
MEDICALATTENTION. DO NOT INDUCE VOMITING. OTHER FIRST AID: NONE

Flash Point:0F,-18C
Lower Limits:1
Upper Limits:7
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:EXTREAMELY FLAMMABLE. OVERHEATED, CLOSED
CONTAINERS ADJACENT TO FIRE COULD EXPLODE DUE TO PRESSURE BUILDUP.

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
THE AREA. OBSERVE PERCAUTIONS FROM OTHER SECTIONS IN MSDS. COVER
WITH ABSORBENT MATERIALS AS NEEDED. COLLECT SPILLED MATERIAL USING
NON-SPARKING TOOLS. PLA CE IN A US DOT APPROVED METAL CONTAINER,
AND SEAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, FLAME AND
OTHER SOURCES OF IGNITION. USE ONLY IN AREAS WITH SUFFICIENT
VENTILATION TO MAINTAIN VAPOR CONCENTRATIONS Other Precautions:AVOID PROLONGED BREATHING OF VAPORS OR MIST. USE AN
OPERATING SPRAY BOOTH IF POSSIBLE. AVOID EYE AND SKIN CONTACT; WEAR
CHEMICAL GOGGLES OR SAFETY GLASSES AND IMPERVOUS GLOVES WHEN
HANDLING PRODUCT. K EEP CONTAINER CLOSED WHEN NOT IN USE.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR. AIR-SUPPLIED
OR FILTERING TYPE WITH ORGANIC VAPOR CARTRIDGES ARE RECOMMENDED.
Ventilation:LOCAL AND MECHANICAL EXHAUST RECOMMENDED. AVOID OPEN
ELECTRICAL SOURCES NEAR PRODUCT VAPOR AREAS.
Protective Gloves:NEOPRENE, NITRILE, OR POLYVINYL ALCOHOL
Eye Protection:USE CHEMICAL SAFETY GOGGLES & FACESHIELD
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
REUSE. WASH THOROUGHLY AFTER USE AND BEFORE EATING, DRINKING OR
SMOKING.
Supplemental Safety and Health
FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. KEEP OUT OF THE REACH OF
CHILDREN.

HCC:F2
Boiling Pt:B.P. Text:140F,60C
Vapor Pres:120
Vapor Density:3.0
Spec Gravity:0.78
Viscosity:750-3500 CPS
Evaporation Rate & Reference:2.5 (WATER = 1)
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR, COLORLESS LIQUID. PETROLEUM DISTILLATE ODOR
Percent Volatiles by Volume:67

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
SMOKE PARTICLES WHEN SUBJECTED TO EXCESSIVE HEAT OR FLAME.

Waste Disposal Methods:INCINERATE ABSORBED AND BULK PRODUCT AFTER
MIXING WITH FLAMMABLE MATERIAL IN A LICENSED HAZARDOUS WASTE
FACILITY. DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE
REGULATIONS. US HAZARDOUS WASTE NUMBE R: D001 (IGNITABLE)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.